DWV FITTINGS (FABRICATED PVC)

Aymroo fabricate PVC DWV fittings with either rubber ring or solvent cement joints Fittings are triple welded and fibre glassed. Diameters range in sizes from 225 to 375mm. Fittings are approved for use by major water boards Australia wide.

Standard sizes are available ex stock. Special modifications can be carried out on any fitting to suit local market requirements.

Comply with AS 1260.3
License No.1461

To View Technical Drawings you will require Acrobat Reader, which is free software available by clicking this icon.

	JUNCTIONS F&F 90° 225mm X 100mm - Moulded 225mm X 150mm - Moulded 225mm X 225mm - Moulded 300mm X 100mm 300mm X 150mm 300mm X 225mm 300mm X 300mm 375mm X 100mm 375mm X 150mm 375mm X 225mm 375mm X 300mm 375mm X 375mm VIEW TECHNICAL DRAWING
	JUNCTIONS F&F 45° 225mm X 100mm - Moulded 225mm X 150mm - Moulded 225mm X 225mm 300mm X 100mm 300mm X 150mm 300mm X 225mm 300mm X 300mm 375mm X 100mm 375mm X 150mm 375mm X 225mm 375mm X 300mm 375mm X 375mm VIEW TECHNICAL DRAWING
	LOBSTER BEND F & F or M & F 45°--90° 225mm Ø 300mm Ø 375mm Ø VIEW TECHNICAL DRAWING
	ELBOWS F & F or M & F 5°-15°-22.5°-30°-45° 225mm Ø 300mm Ø 375mm Ø VIEW TECHNICAL DRAWING
Moulded Fitting illustrated	LEVEL INVERT REDUCERS 225mm X 100mm - Moulded 225mm X 150mm - Moulded 300mm X 100mm - Moulded 300mm X 150mm - Moulded 300mm X 225mm - Moulded 375mm X 100mm 375mm X 150mm 375mm X 225mm 375mm X 300mm VIEW TECHNICAL DRAWING
	END CAPS (Solvent Cement Socket) 225mm - Moulded 300mm - Moulded 375mm VIEW TECHNICAL DRAWING
	JUNCTION OR ELBOW I.O. CAN BE FITTED TO BENDS, ELBOWS OR JUNCTIONS AS REQUIRED LEFT OR RIGHT HAND
	COUPLINGS 225mm Ø 300mm Ø 375mm Ø VIEW TECHNICAL DRAWING
	SLAB REPAIR COUPLINGS 100mm 150mm 225mm 300mm
	DISCONNECTOR TRAP 225mm 300mm VIEW TECHNICAL DRAWING
	CLAMP ON I.O. FITTINGS W/SCREWED CAP 150mm X 100mm 225mm X 150mm 300mm X 100mm 300mm X 150mm 375mm X 100mm 375mm X 150mm VIEW TECHNICAL DRAWING
	BOSS CONECTOR 45° 150mm X 100mm 225mm X 100mm 225mm X 150mm 300mm X 100mm 300mm X 150mm 300mm X 225mm 375mm X 100mm 375mm X 150mm 375mm X 225mm 375mm X 300mm VIEW TECHNICAL DRAWING
	LOCKING ACCESS CAPS 225mm Ø - Moulded 300mm Ø - Moulded
	TABLE D\E FLANGES 100mm 150mm 225mm 300mm 375mm
	BOLTED TRAP SCREW SOCKET OR SPIGOT 225mm Ø 300mm Ø 375mm Ø VIEW TECHNICAL DRAWING
	ACCESS FITTINGS F&F OR M&F WITH THREADED OR LOCKING CAP 225 x 100mm Ø - Moulded 225 x 150mm Ø - Moulded 225 X 225mm Ø - Moulded 300 x 100mm Ø 300 x 150mm Ø VIEW TECHNICAL DRAWING
	PU-130 ADHESIVE Polyurethane Based 300ml tubes